How to Use a Stripology XL Ruler for Strips

By GE Quilt Designs | Published: 2026-10-25

Category: How-to Guides

Learn to cut strips fast and accurately with the Stripology XL Ruler. Get step-by-step instructions, common mistakes to avoid, and practical tips for precise quilting.

Quick Answer

To use the Stripology XL Ruler for strips, align the fabric's folded edge with the ruler's marked lines, then cut through the slots to produce multiple strips in one pass. This technique saves time and ensures consistent widths.

Why the Stripology XL Ruler Speeds Up Strip Cutting

The Stripology XL Ruler is designed to replace most of your rulers and cut up to 75% faster. Its built-in slots allow you to cut multiple strips at once without moving the ruler, which reduces the risk of slipping and uneven cuts.

This ruler is especially useful when you need many strips of the same width for projects like jelly roll quilts, borders, or binding. Instead of measuring and cutting each strip individually, you can cut several in a single motion.

One trade-off to note: the XL size is larger than standard rulers, so it requires a larger cutting mat. Make sure your workspace can accommodate its dimensions to avoid overhanging fabric.

Step-by-Step: Cutting Strips with the Stripology XL Ruler

Prepare Your Fabric: Start with a piece of fabric that is folded in half with selvedges together, and press it flat. Make sure the fold is straight and the fabric is wrinkle-free to ensure accurate cuts. A common mistake is skipping the press; wrinkles cause the ruler to sit unevenly, leading to skewed strips.
Align the Ruler: Place the Stripology XL Ruler on the fabric, aligning the ruler's marked lines with the folded edge. Ensure the ruler is square to the fold, and use the grip on the back to hold it firmly in place. Check that the ruler is not shifted; even a small misalignment will make all subsequent strips off-width.
Make the First Cut: Using a rotary cutter, cut along the edge of the ruler to square up the fabric. This gives you a clean starting point for your strips. Always use a sharp blade; a dull blade can drag the fabric and cause inaccurate cuts.
Cut Multiple Strips: Without moving the ruler, insert your rotary cutter into the slots that correspond to your desired strip width. Cut through each slot from the bottom to the top, moving the cutter smoothly and consistently. Do not lift the ruler between cuts; keep it firmly in place to maintain accuracy.
Reposition and Repeat: After cutting the first set of strips, move the ruler down to the new edge of the fabric and align it again. Repeat the process until you have the number of strips you need. When repositioning, align the ruler's lines with the cut edge, not the original fold, to keep strips even.

Product Facts

Stripology© XL Ruler CGRGE1XL: The Stripology XL Ruler is the #1 best seller and can replace 90% of your rulers. This means you can rely on one tool for most cutting tasks, simplifying your quilting setup and reducing the need for multiple specialized rulers.
Stripology© XL Ruler CGRGE1XL